The fracture morphology of fast unstable fracture in polycarbonate

C. M. Agrawal, G. W. Pearsall

Research output: Contribution to journalArticlepeer-review

12 Scopus citations


Fracture tests were conducted on polycarbonate using compact tension specimens. With the aid of fractographic analysis techniques the effects of various geometric and test parameters on the fracture-surface morphology were studied. Four distinct regions were identified on the fracture surface: (i) initiation region, (ii) mist region, (iii) mirror region, and (iv) banded region. The extent of the mist region was found to depend inversely on the ratio of the initial crack length, a, and the specimen width, W. The fracture morphology also was affected by changes in the test temperature and externally applied compressive loads, but it did not exhibit any significant trends as a function of the loading rate. A qualitative model, called the "critical thickness craze crack interaction" (CCI) model, was developed to explain the micromechanisms involved in the fracture process. This model is based on the proposition that the various features on the fracture surface are generated by the interaction of the crack with a critical thickness craze, where the latter is that part of the main craze which has a thickness greater than some critical thickness, d.

Original languageEnglish (US)
Pages (from-to)1919-1930
Number of pages12
JournalJournal of Materials Science
Issue number7
StatePublished - Jan 1 1991

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering


Dive into the research topics of 'The fracture morphology of fast unstable fracture in polycarbonate'. Together they form a unique fingerprint.

Cite this