Creep indentation of human hip articular cartilage: Comparisons of biphasic finite element/optimization and semi-analytical solutions

K. A. Athanasiou, A. Agarwal, G. Constantinides

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Abstract

Using the semi-analytical/semi-numerical biphasic creep indentation methodology and a biphasic finite element/optimization procedure with experimental creep data, we obtained three material properties of articular cartilage in eight human hip osteochondral specimens. Close agreement was observed in these properties obtained with the two procedures, even though different boundary conditions are used in the two methods. Furthermore, we used a finite element/optimization procedure on various initial time intervals of the experimental creep curves to determine if it is necessary to use all data points up to equilibrium for successful evaluation of the tissue's material properties. The results suggest that, in the human femoral head, as little as the first 20 minutes of experimental creep may be needed for successful evaluation of the tissue's intrinsic mechanical properties.

Original languageEnglish (US)
Title of host publication1992 Advances in Bioengineering
PublisherPubl by ASME
Pages195-198
Number of pages4
ISBN (Print)0791811166
StatePublished - 1992
EventWinter Annual Meeting of the American Society of Mechanical Engineers - Anaheim, CA, USA
Duration: Nov 8 1992Nov 13 1992

Publication series

NameAmerican Society of Mechanical Engineers, Bioengineering Division (Publication) BED
Volume22

Other

OtherWinter Annual Meeting of the American Society of Mechanical Engineers
CityAnaheim, CA, USA
Period11/8/9211/13/92

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Creep indentation of human hip articular cartilage: Comparisons of biphasic finite element/optimization and semi-analytical solutions'. Together they form a unique fingerprint.

  • Cite this

    Athanasiou, K. A., Agarwal, A., & Constantinides, G. (1992). Creep indentation of human hip articular cartilage: Comparisons of biphasic finite element/optimization and semi-analytical solutions. In 1992 Advances in Bioengineering (pp. 195-198). (American Society of Mechanical Engineers, Bioengineering Division (Publication) BED; Vol. 22). Publ by ASME.